Merceriser Machine operates on "Buoyancy Principle" and is simple in design and easy to maintain. Hallow rubber rollers are floating and are completely immersed in caustic lye. Squeezing action between lower rubber floating rollers and the upper grooved rollers gives uniform squeezing effect. Double ends, piggy tail mercerising of thin fabric is possible in our machine. Total counter current system of washing off caustic in recuperation and stabilizer through overflow of recuperate, with the help of pump, gives good caustic recovery. Total counter current system in all wash Tanks to minimize the water consumption.
We offer a full range of products for all kinds of high speed looms. The range starts from three main types of healds, which are ‘C’ type, ‘J’ Type and ‘O’ type and two types of Droppers which are Open and Close.
‘C’ shaped End loop healds are suitable for use on Air Jet, Rapier & all other types of weaving machines suitable for helads. Frames with heald bar of ‘C’ type profile in dimension 22 x 1.7mm. Duplex type heald can also be supplied with eyelet of 5.5 x 1.2mm & 6.5 x 1.8mm.
‘J’ shaped End loop healds are suitable for use of Projectile, Air Jet & Rapier weaving machines. The end loops are with lateral opening ‘J’ shaped upper end loops undulated (corrugated) & lower end loop flat suitable for profile heald bars of 16 x 2.1mm. Duplex type healds can also be supplied with eyelet of 5.5 x 1.2mm & 6.5 x 1.8mm.
‘KEYTEX’™ Flat steel Healds ‘O’ type are suitable for Air jet & Water Jet weaving machines. These are used with Heald Bar size of 9.0 x 1.5mm. Duplex type healds can also be supplied with eyelet of 5.5 x 1.2mm & 6.5 x 1.8mm.
KEY® Brand drop wires are made from hardened and tempered stainless steel strips. These Drop wires are supplied in KEYTEX®. These are produced suitable for mechanical wrap stop motion & Electrical wrap stop motion. The standard ranges of Drop wires manufactured by us are 145mm to 165 x 8 x 0.2mm & 120mm to 180mm x 11 x 0.15mm/0.2mm/0.3mm/0.4mm/0.5mm/0.55mm and 0.6mm.
Type: Simplex, Duplex
Distance between End Loops: 280/331/382
Eyelet Position: Pieced in center or 10 mm above center